Guidelines to Install a Shelving System

Posted by on Aug 24, 2017 in Shelving | 587 comments

If you need more storage space or simply wish to display artwork or an assortment of clocks on your wall, you can construct shelves. A shelving system is composed of three primary elements: shelves, standards (long vertical slotted strips secured to the wall), along with brackets that fit into grooves along the length of these criteria. Since the shelf sits on top of those brackets, you can adjust the height of shelving for some configurations.
Make a preliminary shopping/learning trip to select a shelving system and pick up a planning booklet together with the system’s bracket and standard specifications.
Decide how many shelves you want and how you want to organize them. Sketch the wall, noting that the location of wall studs so that you can plan the layout.
Select the conventional size and shelf depth and style to match the items that you intend to store and exhibit. If you need shelving systems in Melbourne you can visit Plan to distance the criteria about 32 inches apart and allow a maximum overhang of one-sixth of the shelf span.
If you must secure the shelf to a hollow wall, choose mounting anchors according to their weight-bearing capacity. Don’t be embarrassed to ask for assistance!
Most systems have mounts for at least two widths of shelving, so be certain that you purchase the right sizes. Do not leave the shop without everything you want.

shelving systems melbourne
Use a stud finder to find the studs on the wall; they’re usually placed 16 inches apart.
Strategy to put in each standard in the centre of the stud. Make light pen marks on all of the wall studs in the neighbourhood of the spot where you plan to set up the shelving unit. (You may have to correct the exact location slightly so that the criteria are attached to the claws.)
There is obviously a stud on one side or another. Or remove the shade from a lamp and then place the lamp. Wherever you see a nail head, particularly if they appear to be 16 inches apart, it’s likely that there’s a stud behind it.
Mark the place for the top screw hole on the first standard and drill a small pilot hole through its top hole.
Screw in the cap of the normal, but do not tighten it all the way.
You ought to have the ability to swivel the typical right and left.
Use a carpenter’s level to straighten the regular so that it is plumb and then mark the location of a different mounting screw.
Reposition the upright and put in the mounting screw.
Locate the appropriate position of the next standard.
To position, the second standard, place a shelf support mount in the typical hanging onto the wall. Then install a second shelf support bracket in the same slot of another standard. Hold the second standard during the next wall stud and then place a flat (alone or onto a piece of shelving) onto the mounts and move the new conventional up or down until the plate is flat.
Mark the place on the wall of one of the mounting screws to the next normal.
Repeat with the rest of the standards.
These brackets usually tap into slots which lock them in place.
Install the shelves.

Read More